Products

 

 

Accessories and pipes

 

Mufflers – ST, STD & STDL

 

The mufflers are manufactured with top quality galvanized material and high efficiency insulation thereby reducing the noise in line with the customer’s demands. Their straight-flow design results in no loss in pressure and can resist negative pressures of up to 150” of water column. Available for 2” to 24” diameter pipes. They are also available in aluminum and stainless steel.

 

List of mufflers

 

Velocity cone – GR

 

The velocity cones are manufactured with top quality galvanized steel. They protect pipes and ventilators from inclement weather while averting losses in pressure. Available for 2” to 24” diameter pipes.

 

Aluminum blast gates

 

The guillotine valves cast in aluminum are designed for adjusting the flow of air. Their construction limits their use to applications requiring static pressures of less than 50” of water column. Available for 2” to 14” diameter pipes.

 

Stainless steel blast gates

 

The constructions of the stainless steel blast gate are perfectly impermeable, thereby providing a way to balance the flow of air in a network at static pressures of over 100” of water column. Available for 2” to 10” diameter pipes.

 

Self-cleaning stainless steel blast gates

 

The self-cleaning stainless steel blast gates are designed for applications where there are large quantities of dust. Their construction is such that they can be used for balancing purposes or containment purpose at static pressures of over 100” of water column. Available for 2” to 16” diameter pipes.

 

2-way stainless steel blast gates

 

The two-way stainless steel blast gates are designed for workstations where there are two applications or two tools that are being used on a rotating basis. The middle position on the blast gate is able to completely shut off the air flow. Their construction is such that they can be used at static pressures of over 100” of water column. Only available in 2” diameters.

 

Pneumatic stainless steel blast gates

 

The pneumatic stainless steel blast gates are designed for automated applications or applications requiring a substantial force to be opened. Their impermeable construction is such that they can be used at static pressures of over 100” of water column. Available for 2” to 20” diameter pipes. As an option, you can have a second cylinder, a protective guard or the 4-way 24V or 110V pneumatic valve.

 

 

Aluminized steel pipes

 

Straight aluminized steel pipes – LA

 

The straight aluminized steel pipes are sold with one end expanded to make it easier to connect them to each other. The “aluminized” treatment protects the pipe from corrosion. The pipes are sold in 10’ lengths.

  • Ø2” x 10’ ID-OD pipe – LA-020
  • Ø2.5” x 10’ ID-OD pipe – LA-025
  • Ø3” x 10’ ID-OD pipe – LA-030
  • Ø4” x 10’ ID-OD pipe – LA-040
  • Ø6” x 10’ ID-OD pipe – LA-060
  • Ø8” x 10’ ID-OD pipe – LA-080

 

90˚ Elbow - 90A

 

Coude de 90˚ avec rayon central de courbure de 1.5 fois le diamètre. Les coudes sont vendus avec les deux extrémités expandues (Dimension ID) afin de faciliter le raccordement aux longueurs droites. Le traitement « aluminisé » protège les raccords de la corrosion. Ex. : Ø2’’ = rayon de courbure de 3” avec raccordement de Ø2’’intérieur. *autre rayon de courbure disponible sur demande.

  • Ø2” ID-ID 90˚ elbow – 90A-020
  • Ø2.5” ID-ID 90˚ elbow – 90A-025
  • Ø3” ID-ID 90˚ elbow – 90A-030
  • Ø4” ID-ID 90˚ elbow – 90A-040
  • Ø6” ID-ID 90˚ elbow – 90A-060

 

45˚ Elbow - 45A

 

A 45˚ elbow with a curve radius of 1.5 times its diameter. The elbows are sold with both ends expanded (Dimension ID) to make it easier to connect them to straight pipes. The “aluminized” treatment protects the fittings from corrosion.

  • Ø2” ID-ID 45˚ elbow – 45A-020
  • Ø2.5” ID-ID 45˚ elbow – 45A-025
  • Ø3” ID-ID 45˚ elbow – 45A-030
  • Ø4” ID-ID 45˚ elbow – 45A-040
  • Ø6” ID-ID 45˚ elbow – 45A-060

 

“Y” - YA

 

Pipe with two 45˚ branches. The “Y”s are sold with all three ends expanded (Dimension ID) to make it easier to connect them to straight pipes. The “aluminized” treatment protects the fittings from corrosion.

  • Y Ø2’’ ID-ID-ID – YA-020
  • Y Ø2.5’’ ID-ID-ID – YA-025
  • Y Ø3’’ ID-ID-ID – YA-030
  • Y Ø4’’ ID-ID-ID – YA-040
  • Y Ø6’’ ID-ID-ID – YA-060

 

“45˚ TY” - T45A

 

A pipe with one 45˚ branch. The “TY”s are sold with all three ends expanded (Dimension ID) to make it easier to connect them to straight pipes. The “aluminized” treatment protects the fittings from corrosion.

  • 45˚ TY Ø2” ID-ID-ID – T45A-020-020
  • 45˚ TY Ø2.5” ID-ID-ID – T45A-025-025
  • 45˚ TY Ø3” ID-ID-ID – T45A-030-030
  • 45˚ TY Ø4” ID-ID-ID – T45A-040-040
  • 45˚ TY Ø6” ID-ID-ID – T45A-060-060

* lateral branches with different Ø are available on request.

 

“90˚ TY” - T90A

 

A pipe with one branch bent at 90˚. The “TY”s are sold with all three ends expanded (Dimension ID) to make it easier to connect them to straight pipes. The “aluminized” treatment protects the fittings from corrosion.

  • TY 90˚ Ø2’’ ID-ID-ID – T90A-020-020
  • TY 90˚ Ø2.5’’ ID-ID-ID – T90A-025-025
  • TY 90˚ Ø3’’ ID-ID-ID – T90A-030-030
  • TY 90˚ Ø4’’ ID-ID-ID – T90A-040-040
  • TY 90˚ Ø6’’ ID-ID-ID – T90A-050-050

* lateral branches with different Ø are available on request.

 

“Straight T” - TDA

 

A pipe with one perpendicular branch. The “Straight T”s are sold with all three ends expanded (Dimension ID) to make it easier to connect them to straight pipes. The “aluminized” treatment protects the fittings from corrosion.

  • Straight T Ø2” ID-ID-ID – TDA-020-020
  • Straight T Ø2.5” ID-ID-ID – TDA-025-025
  • Straight T Ø3” ID-ID-ID – TDA-030-030
  • Straight T Ø4” ID-ID-ID – TDA-040-040
  • Straight T Ø6” ID-ID-ID – TDA-060-060

* lateral branches with different Ø are available on request.

 

Reducer – RA

 

The reducer provides a way to connect two pipes with different Ø. The “aluminized” treatment protects the reducers from corrosion.

 

Piping union – MA

 

The piping union provides a way to join two straight pipes with the same Ø. The “aluminized” treatment protects the collars from corrosion.

 

Caps - CA

 

A cap for the purpose of closing the end of the pipe. The “aluminized” treatment protects the caps from corrosion.

 

Customized fittings

 

We can manufacture customized fittings according to your needs and specifications for aluminized steel pipes from Ø 2” to Ø 6”.

 

Heat-shrink sealing joint – JTR

 

A sealing joint that shrinks when exposed to the heat of a flame or to a high temperature gun thereby ensuring a totally impermeable joint.

  • Ø 2” heat-shrink sealing joint - JTR-20
  • Ø 2.5” heat-shrink sealing joint - JTR-25
  • Ø 3” heat-shrink sealing joint - JTR-30
  • Ø 4” heat-shrink sealing joint - JTR-40
  • Ø 6” heat-shrink sealing joint - JTR-60
  • Ø 8” heat-shrink sealing joint - JTR-80
  • Ø 10” heat-shrink sealing joint - JTR-10
  • Ø 12” heat-shrink sealing joint - JTR-12
  • Ø 14” heat-shrink sealing joint - JTR-14

 

Removable sealing joint – JCS

 

A removable rubber sealing joint, which includes tightening collars that ensure a totally impermeable joint.

  • Ø 2” joint - JCS-20
  • Ø 2.5” joint - JCS-25
  • Ø 3” joint - JCS-30

 

Hose clamps

 

Hose clamps in stainless steel are available in all diameters from 0.5” to 24”.

 

 

Aluminum pipes

 

Straight pipes - AL

 

Straight pipes in aluminum are sold by the linear foot to a maximum length of 20’. They have a 0.065” wall.

  • Ø2” pipe OD – AL2
  • Ø3” pipe OD – AL3
  • Ø4” pipe OD – AL4
  • Ø6” pipe OD – AL6

45˚, 90˚ elbows and fittings

 

Aluminum elbows and fittings are available on request.

 

 

Spiral Tubes

 

Spiral tubes and fittings

 

Spiral tubes with vacuum-resistant walls, as well as the appropriate pipe fittings are available on request.

 

 

Stainless steel pipes

 

Stainless steel pipes and fittings

 

304 and 316 stainless steel pipes, as well as the appropriate fittings are available on request.

 

 

PVC pipes

 

PVC pipes and fittings

 

PVC pipes, as well as the appropriate fittings are available on request.